Invamat Flame Retardants
Flame-retardant materials are designed to reduce the susceptibility of metal, wood, concrete or other building structures to fire and reduce the speed of flame propagation in the event of a fire. The use of flame-retardant materials can significantly reduce the risk of the occurrence and spread of fire, which increases the safety of life and property.
Invamat is a manufacturer of high-quality flame retardant and other materials for construction and repair intended for professional use.
One of the main types of Invamat flame retardant materials are flame retardants.
Invamat Barrier 690 flame retardant for PU foam
The two-component INVAMAT BARRIER 690 is designed for structural fire protection of products made of polyurethane foam and expanded polystyrene (styrofoam) at civil and industrial facilities with an average fire load.
When applying INVAMAT BARRIER 690 to the protected surface, 2 layers of passive fire protection are created, thus increasing the fire resistance limit of foam and polyurethane foam to 15-17 minutes, which significantly increases the time required to evacuate people and valuables from the object where the fire occurred.
The composition of INVAMAT BARRIER 690 is not aggressive for PPU and EPS, does not change or worsen the thermal insulation characteristics of foam, polystyrene and polyurethane foam. During the operation of the coating, there is no peeling from the foam, foam and / or cracking.
Flame retardant for INVAMAT 678 cables
The composition is designed to reduce the flammability of electric cable lines of various types: power, control, communication, etc., having outer shells made of rubber, PVC, polyethylene. It can be used in industrial, civil and residential construction structures, tunnels, sewers, as well as in rolling stock. Suitable for all kinds of cables. The coating for fire protection of the INVAMAT 678 cable under the influence of flame or heat rapidly increases in volume with the formation of heat-insulating foam.
INVAMAT 678 has high adhesion to the materials of the cable sheaths and does not have an aggressive effect on them. Flame-retardant coatings have good thermal conductivity, therefore, do not require a reduction in the current load.
Applying INVAMAT 678 flame retardant coating to the cable not only prevents ignition, but also reduces the rate of gorenje propagation, the release of toxic and corrosive substances.
An important feature of the INVAMAT 678 composition is that after application to cables and complete drying, the composition remains elastic, which allows for various work with cables (transportation, laying, temporary laying, etc.), without losing their fire-retardant properties.
INVAMAT 678 Flame retardant for cables, metal bucket 20 kg
INVAMAT 678 Flame retardant for cables, metal bucket 10 kg
INVAMAT 670 fire protection coating
INVAMAT 670 fire protection coating with INVAMAT 606 sealant. Economical fire safety of medium and large sized holes in walls and ceilings.
Application areas
- For walls and ceilings
- Single cables and cable bundles
- Fire protection of mixed penetrations
- Sealing of air duct penetrations
Advantages
- Can be applied by brush or spray
- Good sound insulation
- Does not pass smoke and gas
- Fast application and economical consumption
INVAMAT 670 Fire protection coating, metal bucket 20 kg
INVAMAT 670 Fire protection coating, metal bucket 10 kg
INVAMAT 670 Fire protection coating, plastic bucket 6 kg
Flame retardant for INVAMAT 670M metal structures
The composition for structural fire protection of metal structures INVAMAT 670M is a product that is designed to create flame–retardant coatings of the swelling type, with a thickness of 3 mm or more.
When using INVAMAT 670M, mesh reinforcement is not required, the complexity of work on fire protection of metal structures using INVAMAT 670M is significantly lower than when using traditional structural materials, such as basalt, fiberglass, vermiculite slabs and mats.
Properties
- One-component, ready-to-use composition.
- It can be used on top of a large range of primers.
- Does not emit harmful substances during application and storage. The solvent is water.
- It does not have a harmful effect on the human body and animals.
- It does not require highly qualified personnel and additional equipment.
INVAMAT 670M Flame retardant for metal structures, metal bucket 20 kg
INVAMAT 670M Flame retardant for metal structures, metal bucket 10 kg
Concentrated composition of INVAMAT 720 wood fire protection
INVAMAT 720 is designed for comprehensive protection of wood products from the effects of fire (meets the I and II groups of fire-retardant effectiveness according to GOST 16363), fungus, mold and insect pests. The concentrated composition of the INVAMAT 720 tree fire protection is produced in the form of powder (crystals of white-gray color), is a complex system of flame retardants, fungicides and stabilizers. Designed for both professional use and at home.
The concentrate has a long shelf life, is convenient for transportation and preparation, has a density of 2.29 g/cm.3 To prepare the working solution, the powder is mixed with water in a ratio of 1:2 by weight.