New products from Hilti

Twice a year, in spring and autumn, new Hilti products appear on the market, because research and development never stops.

This spring, Russian builders will see a lot of new tools, accessories and consumables.

Tools

TE 500 Jackhammer

TE 500-the lightest network jackhammer in the Hilti portfolio, differs fr om its predecessors in the "space" design and the absence of a side handle, the role of which is performed by the extended cover of the cartridge. However, fans of the "classics" can, if desired, install the usual handle. The improved cooling system and sophisticated dust protection increased the service interval of the hammer by 50%. This was also facilitated by a quick-change network cable and a significantly increased resource of carbon brushes, which the user will also now be able to easily change independently.

Basic network USM AG 125-8SE

The AG 125-8SE is a lightweight 800-watt ACM designed primarily for metalworking.

SF 4 A-22 cordless screwdriver

SF 4-A22 – the long-awaited universal drill-screwdriver, which replaces one of the most popular and favorite tool builders – SFC 22-A. The dimensions and weight of the new product have become even smaller, and the torque has increased significantly. Thanks to the brushless motor, the owner of the SF 4-A22 no longer needs to think about the resource of carbon brushes, and the metal chuck will allow you to perform a wide range of drilling and screwing operations.

SFE 2-A12 screwdriver with 4 cartridges

The SFE 2-A12 is a fundamentally new ultra-compact universal instrument based on a 12 volt platform. Miniature and powerful for such dimensions, the battery-powered brushless drive allows instant installation of any of the 4 cartridges or even a combination of them. This versatility will be appreciated by many craftsmen whose work is associated with drilling or installing fasteners in tight and hard-to-reach places, wh ere it is not possible to get close with a "classic" tool.

SD 5000 - A22 screwdriver for drywall mounting

The SD 5000-A22 is a new generation of another legendary Hilti tool that has made the work of drywall installers fast and effortless. User reviews of the SD 5000-A allowed us to make the screwdriver even better. In the new generation, it became 30% lighter, received a brushless motor, a more ergonomic handle and power button, as well as a bright illumination of the working area. Along with the improved store for SMD 57 screws, a new model of the SD-M2 store with an even more compact design for screws with a length of 25-51 mm in a special tape is entering the Russian market.

Construction Vacuum Cleaners VC 20L-X/VC 40L-X

VC 20L-X, the lightest and most compact of the network construction vacuum cleaners. The high reliability and unsurpassed performance of the new product is complemented by the most modern digital technologies. The automatic filter cleaning function will no longer annoy the operator with loud claps every few seconds. The intelligent control system will only give the command to clean the filter when it really needs cleaning. The filter status and the fullness of the container are also displayed in the control panel. Due to the limited volume of the container, the continuous work time for cutting and grinding concrete may be limited. Then it is recommended to choose a more versatile model.

The VC 40L-X is a universal vacuum cleaner that is suitable for all construction applications. This model, like its younger brother, has an unusual design. On the flat top cover, you can place one or even several suitcases with tools, and the built-in handle will allow you to transport them to the place of work. The large rear wheels of the vacuum cleaner will not prevent you from doing this with any irregularities of the construction site.

Stroborez DCH 150-SL

The DCH 150-SL retained the exterior features and design features of its predecessor, the DC-SE 20 stroborez, but at the same time received new features. The diameter of the diamond discs is increased to 150 mm. In practice, this means that the depth of the shroud has increased to 50 mm. To do this, the engine power is also increased to 2500 watts. Soft handles dampen vibration and increase working comfort. The laser pointer allows you to make perfectly smooth strobes even for a not very experienced operator. Today, the DCH 150-SL is the fastest concrete slitting machine on the market. Every builder knows that such work is one of the most dusty, and concrete dust is the cause of many occupational diseases, so when processing mineral materials, reliable dust removal is very important. Thanks to the new swivel connection, connecting any Hilti vacuum cleaner to a stroborez is a matter of one second.

DSH 900-X Fuel Cutter

Powerful rear-handle petrol cutter with 87 cc engine and quick start function (thanks to automatic carburetor) for cutting up to 150 mm deep.

Features:

• New air filter with higher filtration efficiency = minimizing the wear of the cylinder coating with particles larger than 5 microns
• DSH-P Pump. Independence from main water/ second operator
  
• Cyclone filter
• Easy to use. Built-in key holder
  
• Easy self-service . No belt tension required. Easy replacement of the air filter
  
• Reinforced casing
• Ability to convert to flush cutting mode
• Fuel. Various synthetic oils are suitable for two-stroke engines
  
• A new almost invulnerable starter cable. The service life is 5-10 times higher than the previous one
  
• New cylinder cover. Less sensitive to the quality of the fuel mixture, minimizes cylinder wear
  

Consumables

TE-S carbide drills

TE-C-the most massive concrete drills in the Hilti program.

Features:

• Reliability. The carbide tip, strong core and double helix make the drill more reliable
• Improved head geometry for fast drilling
  
• Resource increased by 40% compared to the previous version of TE-C
  
• The line changed from red to black
• Applications. Suitable for drilling in non-reinforced concrete, brick and foam blocks
  
• Drilling speed. Provides good drilling speed over the entire service life

Impact drill bits TE-C BK

TE-C BK is a new impact drill bit for drilling bricks, foam blocks, sandstone and similar materials with the SDS-Plus drill bit. Available crowns of seven diameters - from 45 to 90 mm.

Features:

• The location of the teeth. The asymmetric arrangement of the teeth creates different impact characteristics, which increases efficiency and makes the drilling process faster.
  
• Centering drill. For easy and precise drilling
  
• Geometry of the cutting edge of the tooth. The sharp geometry of the cutting edge of the tooth creates an extremely fast drilling speed. Drilled holes are cleaner
  
• Easy extraction of the drill stitch. The asymmetric arrangement of the teeth ensures easy extraction of the drill rod and separation of the crown
  
• Optimization of work. The increased protrusion of the carbide tip and the chamfer on the toothed crown prevent the drill fr om jamming in the drilled hole
  
• Special set screw. With internal hexagon prevents loosening of the centering drill bit during drilling
  

Bimetallic crown with carbide teeth

Features:

• New drill bit with extended service life
• Carbide teeth
• Versatility. Suitable for working with any base materials (stainless steel, metal, wood, plastic, drywall)
  
• Long service life. Up to 10X more than before 
• New reliable spindle  

P-U diamond crowns-now with BL, BI, BS shanks

Features:

• Using. Now suitable for use with installations of any capacity
  
• Availability. All P line crowns are available with all shanks

SPX-SL diamond cutting discs with a new diameter of 150 mm

Features:

• Versatility. Suitable for all base materials
  
• New diameter-150 mm
• Performance. Higher performance on solid concrete due to the updated formulation of the diamond segment

• A resource. Excellent dust removal thanks to the large holes in the cup body. The resource is higher due to the size of the segments
  
• Stable result. Efficient cooling thanks to the patented holes on the housing, which allow the segment not to overheat
  
• Reliability. Due to the ribbed surface, the contact area of the segment and the body is maximized. This ensures extremely reliable mounting
  
• Individual balancing of each cup
• Performance. The shape of the segment allows you to increase the grinding speed and achieve high quality concrete processing. High concentration of diamonds

SPX blades for reciprocating saws

The blades are equipped with special shaped carbide teeth made of tungsten carbide. They are available in two versions-metal and wood with nails-and in three sizes-150, 230 and 300 mm. Comparative tests showed a 30-percent increase in the resource of Metal SPX saws and almost three-fold-in Wood Metal SPX canvases compared to the base series. The tests also showed very little heating of the teeth, even when cutting cast iron and stainless steel.

Mechanical anchors

HST2 base anchor stud

Features:

• Installation. Suitable for installation in cracked concrete
  
• Documentation. There is all the necessary documentation for use in construction in the territory of the Russian Federation
  
• Load-bearing capacity. Higher load-bearing capacity than similar anchors on the market
  
• Easy installation. Using the torque adjustment module with a wrench SIW 6AT-A22
  

Spacer anchor - HSL4

• Data Matrix Code (DMC). The DMC code contains a unique ID number, which allows you to get all the relevant information about the anchor-the article, name, installation instructions, certificates and guide to the anchor fastener
  
• Wide product portfolio. Available in diameters M8-M24. 4 different anchor configurations
  
• Technical documentation. A wide range of Russian and foreign permits
  
• Unique design. The best among anchors for static loads, especially for shear. Low edge and center-to-center distances. Variable anchor depth
• Applicable in all conditions. Static. C1/C2 seismics. Fatigue loads. Shock loads. Fire resistance
• The quality of the installation. Drilling with a hollow drill. Drilling with a diamond crown. No scrolling in the hole. Reduced tightening torque. Possibility of dismantling

More about new products>>