Category 7a S/FTP Twisted Pair Outdoor Cable
The Hyperline assortment is replenished — we have a new SFTP4-C7A-S23-OUT-PE-BK cable based on a twisted pair of category 7a (class Fa) for digital transmission systems, designed for operation in SCS and broadband access networks in the frequency range up to 1000 MHz.
The cable meets the requirements of GOST and international standards
The new cable fully complies with the requirements of GOST R 53246-2008 ("Information technology. Structured cabling systems"), ANSI/TIA-568-D and ISO/IEC 11801 standards, as well as GOST R 54429-2011 ("Symmetrical communication cables for digital transmission systems. General technical conditions").
Shielded cable for outdoor installation
The SFTP4-C7A-S23-OUT-PE-BK cable is designed to build a category 7a SCS backbone subsystem in conditions of increased electromagnetic interference, exposure to sunlight and moisture. Double shielding (S/FTP) provides improved protection against interference and cable-to-cable interference.
Double shielding of copper conductive cores (S/FTP)
The cable contains 4 twisted pairs of copper single-wire conductors. Each pair is protected by an individual screen made of metal polymer tape, and the entire structure is covered with a common screen — a braid of tinned copper wires. Conductor diameter: 0.58 mm (23 AWG), insulation of polyethylene foam conductors with an outer diameter of 1.35 mm; nominal cable diameter: 7.8 mm.
The outer shell is made of light-stabilized polyethylene
The SFTP4-C7A-S23-OUT-PE-BK cable is produced only in black; its outer shell is made of light-stabilized polyethylene. Accordingly, this cable can only be used outdoors for laying:
- in the cable sewer;
- tunnels;
- collectors;
- pipes;
- outside the walls of buildings.
The temperature range during operation is allowed from -40 to +70 ° C.