Era of new solutions: new generation metrology equipment from m.era.

At the current stage of industrial production development, it is difficult to overestimate the importance of metrology in general and measurements in particular. The increasing complexity of manufactured parts, combined with their tendency to reduce their size, the requirements for measurement automation and control of production processes based on measurement results, all this indicates the beginning of a new, so-called era of metrology or the era of measurements. This trend is also reflected in the trademark m.era, which can be interpreted as "metrology era" or "measurement era". – the era of metrology and the era of measurements, respectively).

The long path of development that various measures and standards have followed throughout the history of mankind reflects the constant pursuit of perfection and the ideal. Similarly, the equipment under the trademark m.era has incorporated the best available technologies in the field of measuring geometric quantities and includes 8 series of coordinate measuring machines and 4 series of devices for measuring shape deviations.

Product line of equipment

• Conturographs - for estimating linear-angular contour parameters;
• Profilometers - for estimating the parameters of the micro-dimensions of the surface;
• Contour profilometers;
• Round meters are used to detect deviations in the shape and location of surfaces on the measured part.

Each series of devices includes models that differ from each other in the measurement range, degree of accuracy and automation of the measurement process.

Problems that the equipment will solve

• Roughness measurement on any surface. The exclusion of exemplary measures of comparison and the human factor from everyday life. Any degree of automation for parts of any complexity, from shafts and spheres to housings and gears.
• Measurement of a complex contour. Complex two-dimensional geometry, such as conjugate radii, transitions, inflection points, and center-to-center distances on exterior surfaces and, importantly, in interior openings, are no longer a problem for modern measuring equipment.
• Measurement of thread parameters, including diameters. The exclusion of threaded gauges (rings and plugs) and countercalibres from use, the maintenance of which often costs a serious expense in each enterprise. Direct measurement of threads on parts using a two-way probe allows you to measure diametrically positioned contours and evaluate the pitch, angle and half angle of the profile, the smallest, average and largest diameter on most types of threads.
• Measurement of threaded and smooth gauges. If it is not possible to avoid using threaded and smooth gauges, then we will offer you a solution for automatic measurement of threaded and smooth gauge plugs and gauge rings with a wide measuring range. The software performs an assessment according to Russian GOST standards for calibre control.
• Measuring the deviation of the shape and location of surfaces. High-precision measurement of roundness, cylindricity, straightness, flatness and other parameters on cylindrical parts with a diameter from 1 mm to 600 mm, height up to 1300 mm in manual or fully automatic mode.

More than just a measure!

Choosing m.era equipment, you get not only a modern measuring instrument. Together with it, the entire range of support and technical support is provided, including services for:

• installation;
• calibration;
• briefing;
• warranty and post-warranty service;
• modernization.

All this gives the user complete confidence in the efficient and long-term use of the equipment for the successful solution of the set measurement tasks.