Electric rope winches of the TSA series from Ocalift!
TSA series construction winches are professional winches. Designed for low- and medium-intensity construction and installation work. They are used for lifting building materials, for installation on mini construction cranes, for working in wells, etc.
Included with the winch is a construction hook with an enlarged mouth and a load doubling unit (block-pulley). The lifting speed decreases by half when using a block pulley. The winch body is lightweight, made of high-strength aluminum. The winch is equipped with additional cooling. The winch can be installed both on a special platform and on a horizontal and vertical plane with an anchor or bolted connection.
Key features of the TSA series winches:
- Lightweight construction.
- Load capacity: 200kg, 300kg, 500kg.
- The rope capacity is up to 100 meters.
- Additional cooling.
- Lifting speed up to 24 m/min.
- The power supply is 220V/380V, the control unit is equipped with a voltmeter.
- A large cargo hook with a removable load doubling unit.
- It can be equipped with a carriage for installation on an I-beam.
Free-descent winches of the TSA-CL series
The TSA construction winch with free descent is designed for mass use in construction, finishing and facade work, as well as for any lifting and traction operations. A clutch is installed on the winch. The coupling allows you to disconnect the drum with the rope from the motor gearbox. This function allows you to quickly lower the hook down without turning on the winch, which speeds up work and saves the life of the winch. The clutch is operated manually using a lever on the winch drum.
Technical specifications:
- Type - electric
- Weight, kg - 47
- Voltage, V - 220
- Load capacity, kg - 300
- Power, kW - 2.3
- Rope length, m - 60
- Lifting speed, m/min - 15
Construction winch:
- Control cable length: 3m
- Operating conditions: -20 + 40C, light, S3-30%, Y2 (use under a canopy);
- Brake: electromagnetic, reliably locks the load when the power is turned off;
- Cooling: fan on the motor shaft, additional fan on the housing;
- Mounting: on the site using anchor bolts on the floor, on the wall or on the ceiling.
Design features:
- Clutch for free rotation of the drum;
- Two permanent cooling fans.
Recommended for installation on a mini OCALIFT rotary crane!
