The PRO TOOL INNOVATION AWARDS (PTIA) is the "Oscar" among professional tools. PTIA Award (https://protoolinnovationawards.com ) was established for in order to provide professionals and serious home craftsmen with the latest innovations and novelties in the field of tools.
Our article below will review the most interesting winners of the PTIA 2021 award in the category "Hand tools". You can find winners in other categories of the instrumenthere!
These award-winning hand tools deserve the same recognition as power tools. After all, hand tools are a staple in electrical engineering, plumbing, mechanics and automotive. Power tools can't do everything! This year's award-winning hand tools have proven to be more ergonomic, offer additional features and capabilities, and solve some unique challenges. Here are your winners in the PTIA 2021 Hand Tools Awards category.
The winner is the Milwaukee Tool 18" and 24" fiberglass bolt cutter with PIVOTMOVE rotating levers.
PIVOTMOVE rotary handle fiberglass bolt cutters are designed to provide the best access and are available in sizes 18" and 24". Adaptable rotating handles allow you to make more cuts around obstacles typical of utility networks. Fiberglass bolt cutters are UL 1000 V class to provide additional safety. Forged steel bolt cutter blades undergo special heat treatment to ensure maximum strength. Bolt Lock locks the hinge bolts, preventing them from loosening.
The winner is LENOX Aviation Scissors.
The new Lenox Aviation scissors contain improvements that any professional will notice and appreciate. The improved mechanical advantage not only makes cutting 24% easier than with previous products, but also increases the length of the cut relative to the reach of the hand to maximize the cut in one click. Two very important features when cutting sheet metal. The improved blade processing prevents material from being trapped when cutting, and the patented blade joint on the hinge bolt prevents the blade from loosening and peeling off - a common disappointment that prematurely sends the scissors into the trash. The two-tone coating on the body and handles allows end users to determine which scissors are located (left, right or in the center) both in the tool box and in the bag. Ergonomics have also been improved and an elastomeric coating has been added for comfort and stability on one handle and a smooth texture on the other handle (where the hand slides), providing power and reducing the formation of calluses.
The winner is a Magnesium stapler hammer Tacker HT50Mg-4.
The Arrow HT50MG hammer stapler is the first hammer stapler with a magnesium body. The magnesium body allows this tool to be stronger than traditional steel hammer staplers, and also have less weight than competitors. This tool also has an ergonomically shaped handle, a lower loading magazine and an HT50-style head.
The winner is SOLA BIG RED digital levels with Bluetooth technology.
BIG RED digital levels are ideal for use in any place where it is necessary to quickly and accurately measure slopes, inclines and angles. These digital levels are highly accurate, with a built-in electronic inclinometer module and Bluetooth, which interacts with the free SOLA Measures application.
The key feature of the BIG RED digital levels is the built-in electronic tilt module (Solatronic module) with a measurement tolerance of 0.05° at 0° and 90° and 0.10° between 1° and 89°. The measurement results can be displayed using the "Mode" function in °, inches/feet, % or mm/m. Use the "Hold" function to "freeze" the current measured value on the display, and use the "Inc" function (for "tilt") to easily transfer angles.
When performing inverted measurements, the readings on the digital display automatically change along with the level. The display with constant illumination allows you to clearly read the measurement results even in poor lighting. In case of unfavorable angles, you can turn on an audio alert. This makes it easier to take measurements without directly viewing the display and is ideal for use when performing tasks that require the use of both hands.
The winner is the Dry marker Hultafors 650100.
This is not an ordinary carpenter's pencil! Hultafors took a different look at the classic marking tool with several improvements. Firstly, it can be filled with graphite or chalk. In addition, it has a narrow handle, like a traditional pencil, which makes writing more natural. Then add a holster with a belt clip and include a sharpener in it. Whether you're making lines or writing instructions, this pencil will be a big step forward.
The winner is a 3.25-inch Crescent Tools Tradesman pocket knife with an aluminum handle CPK325A.
Crescent does a lot right with the design of its CPK325A pocket knife. The shape of the blade is very functional, has excellent piercing and slicing characteristics, and the handle has a comfortable ergonomic shape. What sets this knife apart is that you get steel with a D2 blade on the knife for a little over $25. With these materials and this price, you can choose one for yourself, and the other for a partner who always lends your knife.
The winner is a durable universal knife with a scraper #TB-H4S5-01.
The patented switching mechanism allows you to quickly switch between a universal knife and a scraper with one swipe of your thumb: TOUGHBUILT presents a universal knife with five blades with blade storage on the tool and a break-off blade. TOUGHBUILT announces the release of the first of its kind universal knife with five blades. The knife can be used in a variety of conditions, such as construction, finishing, painting, household chores and industrial use. It can cut paper, cardboard, leather, drywall, plastic wrap and other materials.
This patented multitool can also switch between two different modes: 1) In scraper mode, it can remove paint, putty or glue from the surface. It can also remove labels from windows, mirrors, tiles, etc. 2) In the niversal knife mode, it has a sturdy metal handle. The unique quick load change system allows users to easily change blades without additional tools. The knife consists of five blades and is specially designed to work with various materials.
The winner is the Roulette DEWALT 25ft Tough Series DWHT36925S.
DeWalt is expanding its roulette game by releasing a new roulette ToughSeries. Strong enough to withstand a fall from a height of 100 feet on packed soil, it has a very strong body. As for the tape itself, a wear-resistant coating is applied to its entire length, and the first 6 inches have an additional advantage in the form of Rip-Shield layering. It's time to expect roulette to work harder.
The winner is DEWALT DW055PL ATOMIC 55FT Pocket LDM.
The DEWALT Pocket Laser Rangefinder (LDM) is the smallest and most compact LDM on the market, which makes it convenient to use and easy to store. This LDM is one of the first tools to represent the ATOMIC sub-brand and is the epitome of compact dimensions combined with superior power and performance.
This DEWALT ATOMIC LDM matches the name DEWALT with a rubber coating for extra strength and protection from falls. You can take it to the construction site without fear of a cracked or broken screen.
The winner is GEARWRENCH Pitbull Auto-Bite pliers made of two materials for tongue and grooves 82594C.
The exclusive Auto-Bite lever allows you to adjust the sponges with one hand.
With the Auto-Bite lever turned on, squeeze the handles and the sponges will automatically switch to strong grip mode.
-
Teeth with aggressive tilt angle for better grip
-
More sponge positions for more flexibility, grip comfort and increased capacity
-
Grip Zone handles for secure grip
-
The latch design prevents the palm or fingers from being pinched by the handle
-
Ergonomic handles with a mounting point increase overall comfort and safety
-
Marking on the tip of the tool for easy identification of pliers
The winner is the Goldblatt G02807 molding remover.
Goldblatt Undamaged Stucco Remover provides a convenient and easy way to remove stucco without damaging the material or the wall you are pulling against. A large powder-coated blade and a swivel spring design distribute the force over a larger area and securely fix the pad, while a smaller part of the blade is attached to the swivel spring. The Goldblatt baseboard mount also features a strong blade mount and an ergonomic soft handle.
The winner is a BLACK + DECKER Battery cutter with a 4V MAX BCRC115FF USB port.
Rotary Tool from Black + The Decker 4V provides versatility and power for all cutting tasks. For use on various materials such as paper, cardboard, leather, plastic, carpet, denim and other fabrics. This versatile tool is indispensable for all your hobbies and DIY projects. A powerful motor can cut 2 times more compared to a manual cutter with less pressure and resistance. The elongated trigger, non-slip comfortable handle and wireless power supply make continuous use and repetitive work easier for your hands, so you can focus on your tasks. With the lock button, you can be sure that the cutter turns on only when you need it.
The winner is a bimetallic folding impact saw Goldblatt G08501.
The Goldblatt bimetallic impact saw is equipped with a high-performance bimetallic saw blade that easily cuts materials and has 3 times longer service life compared to a conventional saw blade. This tool also has a folding mechanism for easy storage and a safety open/close button for safe storage or opening of the blade. And finally, the Goldblatt bimetallic folding saw is equipped with an ergonomic, comfortable handle.
Winner - BLACK + DECKER USB rechargeable Scissors 4V MAX Cordless Power BCSC115FF.
If you make products from different materials or leather, Black + Decker has wireless scissors that you need to look at carefully. Using a set of interchangeable blades, the handle bends down at an angle, which reduces the pressure on your wrist, and the trigger allows you to distribute the work between several fingers. It uses an internal 4V Max lithium-ion battery for power and is simply plugged in for charging. Give your hands a break and return to the pleasure of your craft.
Winner - DEWALT TOUGHSERIES Screwdriver Set for dismantling DWHT65100.
The advanced line of DEWALT TOUGHSERIES screwdrivers is designed to cope with any difficulties that may arise on the work site. A black chrome coating and a nickel-plated tip have been added to increase corrosion and rust resistance by a factor of 10. The S2 steel rods have been preserved in the line, which provide increased strength and resistance to bending, as well as the MAXFIT tip geometry, machined with precision machining, for better contact with fasteners to reduce slippage and remove insulation. Finally, the soft, ergonomic handle made of two materials provides maximum comfort and torque.
The winner is a ratchet wrench and a set of screwdrivers, a set of Proto 41 pcs. J61231.
This innovative tool, being the first multi-faceted screwdriver with two ratchets, offers the versatility of a screwdriver, a T-handle and a short tip in one design, giving users the ability to switch between speed, torque or access depending on the application. The standard high-quality ratchet mode with 45 teeth helps to tighten the screws faster, and the profile with a T-shaped handle provides access to more torque for more complex tasks. Finally, the end cap can be unscrewed and used as a short screwdriver when space is limited. The 41-piece set includes 7-inch blades, 70 mm nozzles and 1/4-inch heads for various tasks and types of fasteners. All of them are placed in a convenient and durable hard storage case.
Winner - Craftsman V-Series X-Tract 9 pcs SAE T-handle, set CMHT26162V.
Thanks to the patented X-Tract technology, the removal of rounded or rusty fasteners has become even easier. The Craftsman V-Series 9pc X-Tract SAE T-Handle set is designed to remove fasteners with rounded corners up to 50%, and also helps prevent new fasteners from rounding or detaching. The X-Tract grooves in the tip create additional grip points for gripping and help to relieve the load from the inside of the fastener when turning. Each key is also made of premium S2 steel for strength and durability, with an ergonomic handle with a molded body for extra grip when working with high torque.
This set includes 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8".
The winner is Kapro Industries 353 Ledge-It square.
There is a lot going on in Kapro 353 Ledge-It Square that sets it apart from others. You can highlight the accuracy of the angle of 90° with a handle that also allows you to accurately mark the angles of 30° and 45°. What is really unique is the retractable metal part - the support of the ledge. It fits against the edge of the ruler and on top of the material, preventing the square from slipping off during line marking. It doesn't look like any other square we've seen before.
The winner is CRAFTSMAN Heavy duty reverse stapler CMHT82643.
The CRAFTSMAN Heavy Duty reversible stapler uses PUSHFIRE technology, which allows the use of a brace, reducing recoil and increasing controllability. The composite lightweight construction makes it an ideal tool for stitching heavy staples and general repairs.
The winner is a Stanley FATMAX quick Release wrench.
-
-
The innovative quick adjustment mechanism provides quick and intuitive adjustment by pressing the wheel, with precise adjustment controlled by rotating the wheel with your finger and thumb.
-
Black phosphate coating adds strength and durability
-
Offset 15°: parallel jaws positioned at an angle of 15° ensure reliable grip, exceptional range and accuracy of operation
-
Thin and wide sponges provide convenient access when working in a confined space
-
Two-component soft-grip handle guarantees comfort in use and maximum control
-
Metric/inch scales ensure maximum efficiency and accuracy
-
The integrated hanging hole allows you to securely fasten with a cord and store easily.
