Choosing a sandpaper
The main products of OJSC "Belgorod Abrasive Plant" are represented by a sanding skin on a fabric and paper basis, made using an abrasive material of various grit, type and quality. For binding, reactoplast adhesives are used, differing in joint flexibility, bond strength, water resistance, heat resistance and other parameters.
On the basis of the grinding skin, the plant produces a grinding tool of a wide type-size range. The company also produces fiber, felt and polyester polishing tools.
The manufactured products of JSC Belgorod Abrasive Plant include:
-
segment and endless sanding belts.
-
polishing and felt felt discs.
-
self-fastening sheets and deltas based on a grinding skin.
To understand each letter (number) in the marking of the instrument of this plant, the table below is given.
For the best selection of tools of JSC Belgorod Abrasive Plant, you can use the table below, in it you will find the most suitable series of grinding skins to match the processed material.
Processed material |
Sanding sandpaper series |
Solid wood |
14ASFJ U1C, 14ASFJ C1C, KK19JW, KK19XW, KK18XW, KK17XW, KK16XW, KK15XW, KK10JW, KK10XW, KX10JW, KX10XW, KP10E, KP10C, KP13E, CP10F, CP10E, ZK10JW |
Soft wood |
KK10FW, KK11FW, KP11E, KP11C, CP10F, CP10E, CP13E, LP40C, LP41C |
Chipboard |
CX10YW, CX10RW, CC10 |
MDF |
CX10YW, CX10RW, CC10 |
Plywood |
KK10XW, KK15XW, KK16XW, KX10XW, KX10YW, CX10YW, CX10RW, CC10 |
Furniture board |
KK10XW, KK15XW, KK16XW, KX10XW, KX10YW, KP11E, CP10F, CP10E |
Details made of MDF and chipboard |
CK10XW, CK16XW, CP10F, CP10E |
Parquet |
14ASFJ U1C, 54SFJ U1C, KK19XW, KK18XW, KK17XW, KK16XW, KK15XW, KX10JW, KX10XW, CK19XW, CK18XW, CK16XW, CK10XW, CX10YW, CX10RW, CC10 |
Veneer |
KK10FW, KP10E, KP11E, CP10F, CP10E |
Gypsum slabs |
CX10YW, CC10 |
Paint and varnish surfaces |
KP10E, KP10C, KP11C, KT10CW, KT10AW, CP10F, CP13E, CT10CW, CT10AW |
Primed surfaces |
KP10C, KP11C, KT10CW, KT10AW, CP10F, CP10E, CP13E, CT10CW, CT10AW, LP40C, LP41C |
Putty surfaces |
KP10C, KP11C, KP11E, KT10CW, KT10AW, CP10F, CP10E, CP13E, CT10CW, CT10AW, LP40C, LP41C |
Plastics |
54C SFJ U1C, KK10FW, KK11FW, CK19XW, CK18XW, CK16XW, CK10XW, CP10F, CP10E |
Profile surfaces |
14A SFJ C1C, KK19JW, KK10JW, KK10FW, KK11FW, ZK10JW |
Ceramics |
54C SFJ U1C, CK19XW CK18XW, CK16XW, CK10XW, CP13E |
Stone |
54C SFJ U1C, CK19XW CK18XW, CK16XW, CK10XW |
Glass |
54C SFJ U1C, CK19XW CK18XW, CK16XW, CK10XW, CP10F, CP10E |
Steel |
14ASFJ U1C, 14ASFJ C1C, KK19JW, KK19XW, KK18XW, KK17XW, KK16XW, KK15XW, KK10JW, KK10XW, KX10XW, KX10YW, ZK10JW |
Aluminum |
KP13E |
Alloys |
14ASFJ U1C, 14ASFJ C1C, KK19JW, KK19XW, KK18XW, KK17XW, KK16XW, KK15XW, KK10JW, KK10XW, KX10XW, KX10YW, KP10C, KP11C, KF10, ZK16XW, ZK10JW, ZK10XW, ZX10XW, ZX10YW |
Cast iron |
14ASFJ U1C, 14ASFJ C1C, KK19JW, KK19XW, KK18XW, KK17XW, KK16XW, KK15XW, KK10JW, KK10XW, KX10XW, KX10YW, KF10, ZK16XW, ZK10JW, ZK10XW, ZX10XW, ZX10YW |
Non-ferrous metals |
KK10FW, KP10C, KP11E, KP11C, CP13E, ZK16XW, ZK10JW, ZK10XW, ZX10XW, ZX10YW, LP40C, LP41C |
Alloy stainless steels |
KP10C, KP11C, KF10, ZK16XW, ZK10JW, ZK10XW, ZX10XW, ZX10YW |
Titanium and its alloys |
54C SFJ U1C, CK19XW CK18XW, CK16XW, CK10XW, CX10YW, CX10RW, CP10F, CP10E |
Rubber |
54C SFJ U1C, CK19XW CK18XW, CK16XW, CK10XW |
Leather |
LP60E |
One selection of a series of grinding skins will not be enough to achieve the best result. It is also necessary to correctly choose the grain size that will be applied to this base.
Grain size |
TYPE OF PROCESSING |
|
GOST |
FEPA |
|
200-80 |
F10-F22 |
Stripping operations with a large cutting depth, stripping of blanks, castings. Processing of materials that cause salting of the surface of the circle (brass, copper, aluminum). |
80-50 |
F22-F36 |
Cutting, flat grinding with the end of the circle, sharpening of cutters, straightening of the abrasive tool. |
63-25 |
F30-F60 |
Preliminary and combined grinding, sharpening of the cutting tool. |
40-5 |
F40-F220 |
Flat grinding. |
32-16 |
F54-F90 |
Finishing grinding, processing of profile surfaces, sharpening of small tools, grinding of brittle materials. |
12-6 |
F100-F180 |
Finishing grinding, finishing of hard alloys, finishing of cutting tools, steel blanks, sharpening of thin blades, pre-honing. |
6-M50 |
F180-F280 |
Finishing grinding of metals, glass, marble, etc., thread grinding, finishing honing. |
M63-M14 |
F230-F600 |
Superfinishing, final honing, fine-tuning of thin blades, thread grinding of products with a small step, polishing. |
Sources used :
-
JSC "Belgorod Abrasive Plant",https://www.belabraziv.ru /